PD40 & PD40C – PD 240 Pinhole

PD40 & PD40C – PD 240 Pinhole
Category: Holiday detection
Model: PD40 & PD40C – PD 240 Pinhole
Manufacturer: buckleys
Get more details
Product Description

Buckleys Pinhole / Holiday Detectors enable inspectors to check quickly and effectively for porosity, pinholes and other faults in a wide range of non-conductive coatings and linings.  Buckleys units have been extensively used for many years in the petro-chemical, aerospace, pipeline construction and plastic fabrication industries.

The PD 240 has been specially designed to incorporate new technology and is suitable for checking coating thicknesses of between 64 microns to 25.6mm.
If additional electrodes and accessories are required, the PD 240 can be supplied as a Complete Kit.

Features

  • Lightweight & portable
  • Easy to use
  • Audible & visual alarm fault indicators
  • Clear LCD with backlight
  • Membrane keypad operation
  • Microprocessor controlled
  • Automatic voltage selector (test voltage is set from coating thickness value)
  • Accurate sensitivity control
  • Displays electrode DC current
  • Volume control for quiet environments
  • Power limited to avoid coating damage
  • Existing PHD accessories can be used
  • One year “back to base” warranty
  • CE approved

Basic Kit (ref: PD40) comprises:

PD 240 unit with battery charger and 4 x re-chargeable batteries, power pack, shoulder bag, test probe handle, coiled interconnecting lead, 5m earth lead, steel drum brush and test voltage calculator. A calibration certificate is included in the comprehensive instruction manual.

Complete Kit (ref: PD40C) comprises:

PD 240 unit with battery charger and 4 x re-chargeable batteries, power pack, shoulder bag, test probe handle, coiled interconnecting lead, 5m earth lead, pointed probe, steel drum brush, 2 x 460mm extension rods, electrode shoe, screwdriver, 250mm phosphor bronze brush electrode and test voltage calculator. All contained in a robust, high visibility, transit case. A calibration certificate is included in the comprehensive instruction manual.
 

Technical Specification

  • Adjustable output voltage range: 2-40kV DC
  • Adjustable DC alarm sensitivity: 10 – 450 uA
  • Suitable for coating thicknesses: 64 microns to 25.6 mm
  • Operating time: 10 hrs (tested as BSEN-50356 @ 40kV. Unit fitted with 10000mAh NiMH cells)
  • Test voltage formula: NACE RP0274
  • Weight (unit, shoulder bag & batteries): 1.6Kg
  • Dimensions (unit only): 16cm wide x 6cm high x 20cm deep
  • Dimensions (case): 53cm x 65cm x 25cm
  • Packed weight (PD40): 4.3Kg
  • Packed weight (PD40C): 11.5Kg
  • Packed weight (PD40): 4.3Kg
  • Dimensions (PD40 packed): 36cm x 28cm x 33cm
  • Dimensions (PD40C packed): 57cm x 66cm x 26cm

Note: Due to ongoing technical developments, all stated information is typical and is subject to change without notice or obligation
 

Other Products

View all